UV FLEXO HAND PROOFERS

UV FLEXO HAND PROOFERS View larger

$1,895.00

New product

Precision Tools for Matching Color and Coatings

Finally, a quick and precise way to reliably match PMS and custom colors for UV Flexo, and Primographic inks off-press. After relentless hours of research and much time testing the ultimate way to match color, we finally found what we believe is the ultimate precision color matching tool. Each of the below hand proofers is sold with 1 anilox roll of your choosing (see the table at bottom.) If more rolls are needed please contact us.

With these UV FLEXO HAND PROOFERS, you can go to press with an anilox/ink combination that delivers the precise color you need. Commercially compatible color proofing for both customer color approval, and spectraphotometer readings.

These industry leading units are compatible with solvent based systems, ensuring a minimal clean-up. The easy take down design allows for quick and easy changing of the engraved anilox rolls. The anilox rolls are platinum laser engraved. The Doctor Blade loads the celIs of the anilox rolls and meters the ink to a repeatable ink film thickness.

newhan3.jpg

The Traditional Echocel Junior is a Flexographic hand proofing system incorporating Platinum® laser engraved ceramic anilox technology, steel doctor blade and solvent resistant rubber roll. This system has benefited from years of successful exposure in the field. Designed specifically for water based and solvent inks, this lightweight unit is the standard in the field. Ink path width is 2.75 inch (70mm) Traditional Rolls are engraved at a 60º Hex. The standard part number N008-040 includes one Standard Anilox roll of your choice, from the chart below. You can also order your system with three standard anilox rolls (N008-040A), or even 6 standard anilox rolls (N008-040B).

DRAWDOWN-H_phantom_WebPic1.jpg

Our newest model, the Phantom Proofer, is the ultimate proofer to increase pressroom efficiency! Manufactured with many of the same quality components and high standards as the Echocel Junior, this unit improves upon that design. Its quick change anilox roll mechanism and doctor blade allow for easier clean up, increasing efficiency. The ultra lightweight design features less replacement parts and built-in bearings. Ink path width is 2.75 inch (70mm)

DRAWDOWN H_jrplus_WebPic2.jpg

Echocel Jr. Plus THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURER. HOWEVER - SPARE PARTS AND ANILOX ROLLERS ARE STILL AVAILABLE. THE JUNIOR PLUS IS A WIDER PROOFER (5 inch path instead of 2.75 inch)

Anilox Roll Options.jpg

Datasheet_UVPS.gif
Download Datasheet:
Echocel Jr.pdf

Datasheet_UVPS.gif
Download Datasheet:
Phantom Proofer.pdf

Techpaper_UVPS.gif
Download Technical Papers:
Thumbs.db

SupportDoc_UVPS.gif
Download Support Document:
Anilox Roll Options.pdf

SupportDoc_UVPS.gif
Download Support Document:
Thumbs.db

   

1229 W. Cortland St. · Chicago, IL 60614-4805 · Phone: 1-800-621-1296 OR 773-248-0099 · Fax: 1-800-99FAXUV OR +1-773-880-6647· Email: info@uvps.com © COPYRIGHT 2019 U V Process Supply, Inc.