New product

Temperature has a direct relationship to curing speed: the higher the temperature the faster the cure. Yet, excessive heat may cause the substrate to distort, which can result in registration difficulties or substrate damage. Heat may also cause UV cure system components to fail. Therefore, understanding temperature is critical to ensuring proper cure and to safeguarding the substrate and system from potential failure.

The MINI THERMO-ANEMOMETER Series comes in two models: the Mini Thermo-Anemometer+Temperature and the Mini Thermo-Anemometer+Humidity.

Display Air Velocity and Temperature or Windchill
Fold up protective housing extends to 9" (23 cm) for better reach
Data Hold with Auto power off
Water resistant housing floats
Drop tested to 6 feet (182 cm)

Measures ft/min, MPH, m/s, km/h, Knots, and Beaufort Force
Selectable averaging function of 5, 10, or 13 second intervals
Replaceable non-corrosive plastic wind vane (impeller)

Temperature and Windchill:
Measures from 0 to 122 F (-18 to 50 C)

Mini Thermo-Anemometer+Humidity has these additional features:

Waterproof pocket size with Air Velocity, Temperature, %RH, Dew Point and Windchill

Display air velocity and either Relative Humidity, Dew Point, Temperature or Windchill
Measures RH from 10% to 95%
Measures Dew Point from 32 F to 122 F (0 to 50C)


1229 W. Cortland St. · Chicago, IL 60614-4805 · Phone: 1-800-621-1296 OR 773-248-0099 · Fax: 1-800-99FAXUV OR +1-773-880-6647· Email: © COPYRIGHT 2019 U V Process Supply, Inc.