CON-TROL-CURE® DYNE TEST SOLUTIONS 100CC
are another way printers, converters and extruders can determine surface energy levels. Ranging from 30-70 dynes/cm, these solutions offer an easy and effective method of testing. By wetting the tip of a cotton applicator with one of the mixtures and spreading a line over the test specimen, users can verify treatment within 2 seconds. If the continuous line holds for 2 seconds or more, users can be assured that the material is treated to within 1 dyne of that specific solution. Continuing to test different levels in ascending order will allow the user to ultimately determine the appropriate level of treatment. If the continuous film breaks into droplets in less than 2 seconds, the material is insufficiently treated. Users must continue to test in a descending sequence to determine treatment level.
Applicator must be changed after each test.
See our dyne liquid applicators
Wide variety of testing levels
Applies easily with cotton applicator
6 month shelf life
Sold/100cc plastic bottles
Filled bottle weight = 5 ounces total (bottle+fluid)
Bottle dimensions are 4"H x 2"W x 1.5"D
ASTM D2578 - 08 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films ASTM International, West Conshohocken, PA, 2003, DOI: 10.1520/D2578-08, www.astm.org.
TARIFF/Schedule B : 3204.11.0000
DS-Dyne and Surface Tension.pdf
SDS Liquid Dyne 30-50 US 2015.pdf
SDS liquid dyne 51-70 US 2015.pdf