PROTECTIVE ROLL COVERS
are custom fit protection for cylinders such as anilox, gravure, chill, rubber, rotary dies, and other cylinders used in the printing industry. They are mainly used to protect the edge and face of the cylinders from impact damage that occurs during handling and storage.
Eliminate impact damage on Anilox rolls, Rotary dies, Chill rolls, Embossing rolls, and Gravure cylinders.
Avaialable in Standard & Ultima,research shows that our Standard Roll Covers offer 50 times and our Ultima Roll Covers offer over 125 times the protection of a bare anilox roll.How do I measure my roll(s) to ensure a properly fitting roll cover?
1. Use inches.
2. Measure the circumference, then divide by 3.1416.
Your answer equals the outside diameter (od).
3. Now measure the face length (f l).
4. When ordering, give us these two dimensions.
Your accuracy ensures a properly fitting roll cover.Note:
The Standard roll cover extends 0.75 inch beyond the rolls edges and the Ultima 1.25 inch
Rolls are often stored on racks with very little room left between rack and roll. We can
manufacture your covers without the protective edges. These covers cost less and will allow both cover and roll to fit on a narrow rack system.
DS-FLEXO ROLL COVER.pdf