UV-METER BLACK STANDARD SERIES
+ UV intensity mW/cm
+ Probe type sensor
All measurements are expressed in mW/cm2 in order to compare light sources or to check uniformity of the light emission. Typical application fields are the control of units for the exposure of diazo, polymer, chromaline and daylight films in the graphic arts industry, suntan equipment, sterilisation units and other fields of photo bioIogy. The display readings are fictitiously. The basic setting is done by means of a potentiometer.
Max. Power input : sensor input 2000W/cm
Wavelength: 315 400 nm UV-A (or other)
Temperature: 0 - 45 C
Display: 2x16 Digits
Range : 0 - 1999 mW/cm
Weight: approx. 200 grams
Battery: 3.7 Volt LiPo Accu, rechargeable
Dimensions: 140 mm x 75 mm x 24 mm
Sensor cable: 1 meter
Sensor 40 mm x 10 mm
Base Accuracy: 5 %
The probe-type sensor of the UV-Meter can withstand max. 110 C / 230 F for up to 10 seconds. The
temperature of the housing should not exceed 45 C / 113 F..
In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery. PTB traceable calibration.
UV-METER BLACK STANDARD SERIES.PDF
Download Support Document:
Measuring UV-Terms and Help.pdf
Download Product Manual:
Micro Puck Multi Instruction Manual.pdf