The UV-INTEGRATOR 07
is a high quality UV measuring instrument. It is used to measure UV energy of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying processes.
With its diameter of only 2.75 (70 mm) is it one of the smallest pass-through Integrators available. Due to the round shape it bears a very small risk to get stuck somewhere inside. It is reliable and simple to use. The UV-Integrator 07 is available in five different measuring ranges. By addition of the incidence of the light quantities during the exposure cycle, relative values are calculated. Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear under the same measurement conditions.
The UV-Integrator 07 is available in five different measuring ranges:
UV-Integrator 07, Type 1 UV-V (Diazo) 350 460 nm
UV-Integrator 07, Type 2 UV-A 315 400 nm
UV-Integrator 07, Type 3 UV 250 410 nm
UV-Integrator 07, Type 4 UV-B 280 315 nm
UV-Integrator 07, Type 5 UV-C 230 280 nm
Spectral range: UV 250 410 nm
Measuring range: 0 to 5,000 mW/cm2
Display: 6-digit LCD
Display range: 0 to 999,999 mJ/cm2
Power source: long life 3.6 V Lithium Battery
Power consumption: 100 A
Battery service life: 10,000 hrs
Dimensions: 2.75 (70 mm), height (13 mm)
Weight: approx. 4 ounce (120 grs.)
Temperature range: 0 to 45 C
Heat protection: Heat shield on back plate
Base Accuracy: 5 %
While on the conveyer belt, the UV-Integrator 07 can withstand max. 110 C / 230 F for up to 10 seconds. The temperature of the housing should not exceed 45 C / 112 F.
In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery. PTB traceable calibration acc. to DIN EN ISO / IEC 17025 with certificate.