55 GALLON DRUM WARMER BLANKET

55 GALLON DRUM WARMER BLANKET View larger

$900.00

New product

To maintain better flow characteristics when transferring UV inks, coatings and adhesives from storage drums, a well-controlled temperature of 120°F is recommended. The CON-TROL-CURE™ Blanket Drum Warmer will maintain 55 gallon drums of material approximately 50°F warmer than outside ambient temperatures and uses only 240W of electricity. The built-in thermostat is set at 120°F and will maintain that temperature provided the ambient environmental temperature does not drop below 20°F. Plugs into an ordinary 110V AC circuit.

This efficient 55 GALLON BLANKET DRUM WARMER offers the most uniform distribution of heat available. A total of 7-1/2 square ft of the drum surface is actively heated compared to just 2 square ft on standard belt-type heaters, providing more even heat distribution. The vinyl/fiberglass Blanket Drum Warmer fits snugly around the drum and is secured by adjustable double-D ring straps. A unique heat-retaining insulation cap is firmly secured over the top of the drum and the heat retaining blanket. The 1" fiberglass insulation and outer vinyl jacket direct the heat inward to prevent dissipation into the atmosphere.

NOTES:
IF NO TEMPERATURE IS SPECIFIED AT TIME OF ORDER DEFAULT TEMPERATURE WILL BE SET AT 120°F

- Temperature setting is not user adjustable -

This is a drum warmer, NOT a drum heater. Product comes with a pre-set thermostat. Once drum contents reach specified temperature, the warmer will automatically shut off. This automatic control prevents overheating and saves energy.

- Other temperature settings can be special ordered -
Range for custom temperature settings: 60°F min through 150°F max.

-->
1229 W. Cortland St. · Chicago, IL 60614-4805 · Phone: 1-800-621-1296 OR 773-248-0099 · Fax: 1-800-99FAXUV OR +1-773-880-6647· Email: info@uvps.com © COPYRIGHT 2019 U V Process Supply, Inc.