The UV-POWER INTEGRATOR 612
is a high quality UV measuring instrument. It is used to measure UV energy of different light sources, especially in the CD/DVD production.
It is ideal to ensure quality control of printing and drying processes. Small size, heavy duty pass-through Integrator. With its round shape and a diameter of only 4.7 (120 mm) CD size it bears a small risk to get stuck somewhere inside. It is reliable and simple to use. The UV-Integrator 12 is available in five different measuring ranges:
UV-Integrator 12, Type 1 UV-Diazo 350 460 nm
UV-Integrator 12, Type 2 UV-A 315 400 nm
UV-Integrator 12, Type 3 UV 250 410 nm
UV-Integrator 12, Type 4 UV-B 280 315 nm
UV-Integrator 12, Type 5 UV-C 230 280 nm
By addition of the incidence of the light quantities during the exposure cycle, relative values are calculated. Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear even under the same measuring conditions.
Spectral range: UV 250 410 nm (Standard)
Measuring range: 0 to 5,000 mW/cm2
Display: 6-digit LCD
Display range: 0 to 999,999 mJ/cm2
Power source: long life 3.6 V Lithium Battery
Power consumption: 100 A
Battery service life: 10,000 hrs
Dimensions: 4.7 (120 mm), height (12 mm)
Weight: approx. 9 ounce (260 g.)
Temperature range: 0 to 45 C / 32 to 113F
Heat protection: Heat shield on back plate
Base Accuracy: 5 %
While on the conveyer belt, the UV-Integrator 12 can withstand max. 110 C / 230F for up to 10 seconds. The temperature of the housing should not exceed 45 C / 113F .
In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery. PTB traceable calibration.