When pneumatic pumps are not an option, these electric-powered DUPLEX DIAPHRAGM ELECTRIC PUMPS offer automatic demand control and operate only when liquid flow is required.
Duplex diaphragm design eliminates troublesome shaft seals. Excellent self-priming capability allows pump positioning above liquid. Corrosion-resistant polypropylene construction puts no metal parts in contact with pumped liquid. Handles small foreign particles such as resin, dust, dirt, etc. Recommended use with in-line strainer.
Must be properly grounded to prevent electrical shock. Supplied with grounding conductor and grounding-type attachment plug.
• Pump Design: Duplex diaphragm
• Materials: Housing: Reinforced polypropylene
Elastomers: Santoprene® (UV inks), Viton® (multipurpose)
• Pressure Switch: Off @ 60 PSI (4.1 bar)
On @ 40 PSI (2.8 bar)
• Temperature: Minimum = 45ºF (7ºC)
Maximum = 160ºF (71ºC)
• Ports: 3/8 NP
• Motor: 115V AC, 50/60Hz cycle
• Current: .55 A (maximum)
• Weight: 4 lbs (1.8 kg)
• Flow Rate: 2 GPM (7.5 L/min)
IMPORTANT: Not intended for high flash point fluids (i.e. solvents and such).